Asphalt millings driveway installation Middleburg Florida

M Kerrigan Paving and construction company Fleming Island Florida happy to assist you with all of your Paving needs we are a full-service Paving country company At M Kerrigan Paving and Construction in Green Cove Springs, FL, we installed a new driveway using clean asphalt millings. The homeowner wanted an affordable, durable surface that could serve as a long-term solution or a base for paving later. We completed the work by preparing the existing base, treating vegetation, and placing two inches of compacted millings to finish the surface.

First, we graded and compacted the existing base so the driveway would be level and stable. Proper grading helps water run off where it should and creates a solid foundation for the millings. Once the base was compacted, we sprayed a vegetation killer to prevent weeds and grasses from growing up through the new surface. Treating vegetation at this stage reduces future maintenance and keeps the driveway looking cleaner for longer.

After the base was prepared, we installed two inches of clean asphalt millings across the entire driveway area. Clean millings are crushed reclaimed asphalt that bind together when compacted and driven on. We compacted the millings so they would seat into the base and start the initial tightening process right away.

As an alternative to limestone rock, asphalt millings offer a different performance profile. Millings resist washing out better than loose limestone in many situations, and they help with water displacement across the driveway surface. Because millings continue to tighten over time as vehicles drive on them, the driveway typically becomes firmer and more stable with regular use.

This driveway option also provides cost advantages. A new driveway made from clean asphalt millings is roughly one third the cost of a full blacktop install, so it can be a practical step for homeowners working within a budget. At the same time, because we prepared and compacted the base properly, the driveway can be paved at a later date if the homeowner chooses to upgrade to asphalt.

Throughout the project, our focus was on following the planned steps: grade and compact the base, treat vegetation, and place two inches of clean asphalt millings. That straightforward process gave the homeowner a functional, lower-cost driveway that will improve with use and still allows for future paving if desired. If you have questions about asphalt millings or driveway options in Green Cove Springs, FL, we are available to explain the process and provide estimates.

Budget: 3200

Location: Green Cove Springs, FL